Concrete, paver, natural stone, and Alumawood-covered patios across Victorville, Hesperia, Apple Valley, Adelanto, Phelan, and Oak Hills. Built for caliche soil, 105 degree summers, and 50 mph Cajon Pass wind. 17 years in business, 4.8 stars across 114 Google reviews, CSLB 957605.
A patio in the High Desert is two decisions, not one. The first is the surface: concrete (broom, stamped, exposed aggregate, or acid wash), pavers (Belgard, Angelus, Orco), natural stone (flagstone or travertine), or brick. The second is the cover: Alumawood, wood, vinyl, a Struxure smart louvered system, or an open pergola. Most homeowners pick one of each. We have been pouring, laying, and covering patios across Victorville, Hesperia, Apple Valley, Adelanto, Phelan, and Oak Hills since 2009.
Pricing in 2026 runs about $7 to $15 per sqft for a concrete patio and $25 to $35 per sqft for pavers. Alumawood covers run $27 per sqft non-insulated or $35 per sqft insulated. A 400 sqft surface with a 300 sqft Alumawood cover lands between $10,900 and $24,500 fully installed. Permit-required projects (covers over 120 sqft, gas lines, elevated decks) add 2 to 4 weeks of plan-check time before work starts.
This page covers what each material costs, which one belongs on which lot, how we prep the base for caliche soil, what permits you need by city, and where Alumawood beats Struxure (and where it does not). If you only want covered shade, see the patio cover cost guide. If you only want a hard surface, see the concrete cost guide or paver cost guide. Either way, we run all of it under one CSLB-licensed contract.
Installed pricing across the most common surface and cover types in 2026.
| Patio Type | Cost per Sqft | Lifespan | Maintenance | Best For |
|---|---|---|---|---|
| Broom-finish concrete | $7 to $15 | 30 plus years | Low | Budget builds, side yards, utility patios |
| Stamped concrete | $7 to $15 | 25 plus years | Reseal every 3 to 4 yrs | Mediterranean and traditional homes |
| Exposed aggregate | $7 to $15 | 30 plus years | Low | Slip-resistant pool decks |
| Acid-wash concrete | $7 to $15 | 25 plus years | Reseal every 4 to 5 yrs | Modern desert and contemporary builds |
| Paver patio (Belgard / Angelus / Orco) | $25 to $35 | 40 plus years | Re-sand joints 5 to 7 yrs | Expansive soil, design flexibility |
| Flagstone (dry-laid) | $22 to $32 | 50 plus years | Re-sand joints 3 to 5 yrs | Rustic, custom organic shapes |
| Flagstone (mortar-set) | $26 to $38 | 40 plus years | Reseal every 4 to 5 yrs | Premium estate-scale patios |
| Travertine | $24 to $36 | 40 plus years | Reseal every 3 to 4 yrs | Pool decks, formal patios |
| Brick | $15 to $24 | 50 plus years | Joint repair every 10 yrs | Traditional and historic homes |
| Alumawood cover (over patio) | $27 non-insulated, $35 insulated | 40 plus years | Hose off annually | Most HD homeowners |
| Struxure / smart louvered | $80 to $110 | 30 plus years | Mechanical service every 5 yrs | Premium outdoor living |
| Pergola (Alumawood frame) | $38 to $65 | 40 plus years | Hose off annually | Filtered shade, design statement |
All prices include base prep, demo of existing surface up to 200 sqft, and our workmanship warranty. Steel reinforcement, rebar, and engineering plans are billed separately on covered projects.
Installed totals by patio size and surface material. Add an Alumawood cover at $27 per sqft non-insulated or $35 per sqft insulated if you also want shade. Based on 2026 Monarch pricing in Victorville, Hesperia, and Apple Valley.
| Patio Size | Broom Concrete | Stamped Concrete | Pavers | Flagstone | Travertine |
|---|---|---|---|---|---|
| 200 sqft (10 x 20) | $1,400 to $3,000 | $1,400 to $3,000 | $5,000 to $7,000 | $4,400 to $6,400 | $4,800 to $7,200 |
| 400 sqft (16 x 25) | $2,800 to $6,000 | $2,800 to $6,000 | $10,000 to $14,000 | $8,800 to $12,800 | $9,600 to $14,400 |
| 600 sqft (20 x 30) | $4,200 to $9,000 | $4,200 to $9,000 | $15,000 to $21,000 | $13,200 to $19,200 | $14,400 to $21,600 |
| 800 sqft (20 x 40) | $5,600 to $12,000 | $5,600 to $12,000 | $20,000 to $28,000 | $17,600 to $25,600 | $19,200 to $28,800 |
| 1,200 sqft (30 x 40) | $10,800 to $16,800 | $15,600 to $26,400 | $16,800 to $33,600 | $26,400 to $38,400 | $28,800 to $43,200 |
Larger patios get a slight per-sqft discount because mobilization, base prep, and cleanup costs are spread across more square feet. The break point is usually around 600 sqft.
Tell us your city and rough square footage. We respond within 1 business day with a price range and a site-visit time.
A pergola is an open-roof structure that throws filtered shade. A Struxure is a motorized louvered roof you can open or close on a remote. They serve the same goal as an Alumawood cover (shade over your patio) but they get there differently and cost differently.
Pergola. 50 to 70 percent shade depending on rafter spacing. Aluminum-framed pergolas (Alumawood pergola kits) run $38 to $65 per sqft installed. Wood pergolas run $30 to $55 per sqft but need stain every 2 to 3 years. Pergolas work well over outdoor kitchens, fire pit areas, and dining patios where you want filtered light, not full shade. They do not block rain, so they are not a great pick if your patio is the main entertainment zone in summer storm season.
Struxure (motorized louvered roof). Open the louvers for sun and air flow, close them for full shade or rain protection. Premium systems include rain sensors, integrated lighting, and heaters. Pricing in 2026 sits at $80 to $110 per sqft installed in the High Desert, roughly 2 to 3 times the cost of an Alumawood cover. They make sense on premium outdoor living projects between $35,000 and $80,000 total where the homeowner wants flexibility through the day.
When Alumawood beats both. If you want shade, period, with no moving parts and no maintenance, Alumawood is the better value. Newport profile blocks 100 percent of sun and rain, costs less than half what Struxure costs, carries a limited lifetime warranty, and never needs servicing.
When Struxure is the right call. South-facing patios where you want morning sun and afternoon shade. Pool decks where rain protection matters during pool parties. Premium new builds where the louvered look matches modern architecture.
Permit thresholds vary by city. Verify with the city or county building desk before pour day. Numbers below reflect current 2026 building department guidance for residential single-family lots.
| City | Concrete or Paver Patio | Patio Cover | Outdoor Kitchen Gas | Plan Check Time |
|---|---|---|---|---|
| Hesperia | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 2 to 4 weeks |
| Victorville | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 2 to 3 weeks |
| Apple Valley | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 3 to 5 weeks |
| Adelanto | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 2 to 4 weeks |
| Phelan (unincorp. SB County) | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 3 to 6 weeks |
| Oak Hills (unincorp. SB County) | No permit under 30 in. off grade | Required over 120 sqft or attached | Mechanical permit required | 3 to 6 weeks |
San Bernardino County jurisdictions for unincorporated Phelan and Oak Hills run 1 to 2 weeks longer than incorporated cities because plans route through the county Land Use Services desk in San Bernardino. Always confirm thresholds with the local building desk before pour day.
Every patio project moves through the same 8 phases. Surface and cover scopes overlap on phases 1, 2, 7, and 8. Build time on a typical 400 sqft surface plus 300 sqft cover runs 9 to 14 working days plus permit time.
About 35 percent of the patios we install in the High Desert sit inside HOA communities. Spring Valley Lake, Silver Lakes, Jess Ranch, Sun City Apple Valley, Eagle Ranch, and dozens of smaller associations each have their own architectural review process.
Visible exterior changes (patio covers, retaining walls, hardscape over a certain size) typically require architectural committee approval before work begins. Turnaround from submission to approval runs 2 to 6 weeks depending on the HOA’s meeting cadence. We prepare the full architectural review committee submittal package as part of every covered patio project: scaled site plan, paver or concrete material samples, cover color swatches (Sandstone, Adobe, Sierra Brown, White), elevation drawings showing post heights, and any required engineering stamps.
If your HOA pushes back on a low-water plant strip around the new patio, California Civil Code Section 4735 protects drought-tolerant landscaping. If they require natural turf inside an HOA-mandated zone, AB 1572 prohibits that for new installations.
Free on-site measurement and quote across the High Desert. We build to your budget, not against it. Most quotes return inside 24 hours.
Three places we tell homeowners they can save money without taking 10 years off the patio’s life:
1. Pick broom-finish concrete on side yards and utility patios. Save the budget for the main entertainment patio. A 200 sqft side-yard broom-finish patio at $1,400 to $3,000 frees up dollars for stamped concrete or pavers on the back.
2. Skip the cover ceiling fans on day one. Pre-wire the cover for fans and lights at install ($200 to $400 in conduit), then add the fans yourself or with an electrician later when cash flow allows. Pre-wire is the only step that has to happen at install time.
3. Combine your patio with neighbor demo. If a neighbor needs concrete demo too, we can mobilize 1 dumpster and 1 saw cut crew for both jobs and split the mobilization fee. Saves $400 to $800 per project.
Three places homeowners think they can save money but the savings disappear inside 5 years:
1. Thin base. 2 inches of base instead of 4 saves $300 to $600 today and costs $4,000 to $8,000 in patio replacement in year 5. Always pay for the base.
2. Wood cover instead of Alumawood. Saves $1,500 to $3,000 upfront, costs $400 to $800 every 2 to 3 years in stain. Net loss inside 6 years.
3. Polymeric sand skipped on pavers. Saves $300 today. Joints fail and ants take over inside 18 months. The fix is full re-sand at $1,200 to $2,400.
“Our Alumawood patio cover completely changed how we use the backyard. We went from never going outside in summer to eating dinner out there every night. Freddy’s crew had it up in three days and the city inspector passed it first try. Best money we’ve spent on the house.”
“We got the insulated Maxx Panel and the difference is unreal. Even on 110-degree days the patio feels comfortable. Monarch handled the permit, the install, and added a ceiling fan and lights. Professional start to finish.”
Eight High Desert cities, two distinct soil and elevation profiles, one in-house build crew. Click any city for local project examples.
Caliche common at 18 to 28 inches. Standard Alumawood specs. Spring Valley Lake HOA approvals routine.
Deeper soil profiles. Larger lots allow estate-scale patios with 1,000+ sqft hardscape.
Most severe caliche in the region (12 to 20 inches). Filter fabric and deep piers required.
Sandy loam, less caliche. Many new-construction patios on bare-pad lots with no existing grade.
3,500 to 4,500 ft elevation. Snow load engineering on covers. Wind exposure C ASCE 7.
Larger acreage lots. Patios often pair with outdoor kitchens, fire pits, and pool decks.
Highest elevation in the service area (6,000 ft). Snow load 30 to 50 psf. Heavier cover specs.
Silver Lakes HOA-heavy. Architectural review on every covered project. Lake-front lot considerations.
A 400 sqft concrete patio runs $2,800 to $6,000 installed. The same square footage in pavers runs $10,000 to $14,000, and flagstone $8,800 to $15,200, with Alumawood covers adding $27 per sqft of covered area non-insulated or $35 per sqft insulated.
Both last 25 plus years if installed correctly. Pavers flex with soil movement and can be re-set; concrete is faster and cheaper but cracks predictably along control joints under thermal cycling.
Most ground-level residential patios under 30 inches off grade do not require a permit in any HD city. Patio covers over 120 sqft, attached structures, and gas lines for outdoor kitchens always require permits.
4 to 6 inches of Class II road base compacted in 2 inch lifts to 95 percent Proctor density, with geotextile fabric between the caliche shelf and the base. Skip the fabric and fines migrate up through the joints inside 24 months.
4 inches minimum for residential foot traffic, 5 to 6 inches with rebar on 18 inch centers if a vehicle could ever drive on it. Mix 3,000 PSI with fiber mesh and tooled control joints every 8 to 10 feet.
Alumawood. Wood covers in 105 degree summers and 50 mph Cajon Pass wind crack and warp, need staining every 2 to 3 years, and last 12 to 18 years compared to 40 plus for Alumawood.
Struxure and similar smart louvered systems run $80 to $110 per sqft installed in the High Desert, roughly 2 to 3 times the cost of Alumawood. They make sense on premium outdoor living projects between $35,000 and $80,000 total.
A 400 to 600 sqft paver patio takes 4 to 7 working days from demo to final sweep. Add 1 to 2 days for joint sand cure if rain is in the forecast.
Yes if the slab is 4 inches thick and not cracked through the post-footing area. We core through the slab and install 30 to 36 inch concrete piers at 12 inch diameter at each post location.
Yes, with integral color (not surface hardener) and UV-stable acrylic sealer. Best HD-performing patterns are seamless slate, ashlar slate, and Roman slate; we recommend resealing every 3 to 4 years.
Monarch Landscape & Design, 8455 Hickory Avenue, Hesperia, CA 92345. CSLB 957605. Serving the High Desert since 2009.
Free on-site measurement across the High Desert. No sales pressure. We map material, surface, cover, and budget to your lot and give you a real number inside 24 hours.
Request a Free QuoteOr call (760) 792-7627
